Orbital Shakers
Sigma Aldrich Fine Chemicals Biosciences Orbi ShakerTM MP with 4 po1EA
The Benchmark Scientific Orbi-Shaker MP is designed with a 3mm mixing orbit optimized for thorough mixing of microplates and/or PCR plates. Up to four plates (standard or deep well) can be placed on the included platform and are instantly secured without the use springs clamps or tools.A digital microprocessor ensures accurate speed control over the brushless maintenance free motor drive and both speed and time can be viewed simultaneously on the large LED display.
Andwin Scientific VWR MINI SHAKER 15
- Orbital shaking motion
- 15 mm orbit
- Speed range of 40 to 300 rpm
- Speed accuracy of ±2% above 100 rpm
- Digital LED display for speed and time
- Microprocessor control with variable speed
- Timer ranges from 1 second to 160 hours
- Audible timer alarm
- Maintenance-free brushless DC motor
- Triple eccentric drive system with lubricated ball bearings
- Cast aluminum base material
- Maximum load capacity of 3.6 kg
- Operating temperature range from -10 to 40°C
- 120V electrical input, 5 amps, 25 watts, 50/60 Hz
- Platform dimensions of 29.9 x 22.2 cm
- Unit weight of 10.7 kg
- Overall dimensions approximately 27.9 x 43.2 x 10.2 cm
- 2-year limited warranty on parts and labor
- Includes safety features such as ramping function, overload protection
- Suitable for cold rooms, incubators, and CO2 incubators
ACCEGEN BIOTECH HU ORBITAL FIBROBLAST MED KIT
- Cell culture medium kit
- Primary cell culture use
- Target cells: human orbital fibroblasts
- Compatible with human species
- Applications in Graves' ophthalmopathy research
- Supports spindle-shaped cell morphology
- Key markers supported: vimentin, fibronectin
- Facilitates extracellular matrix production
- Helps in tissue repair processes
- Enhances tissue remodeling capabilities
- Promotes high cell viability
- Source of cells: human orbital connective tissue
Research Products International Corp Orbit P4 Digital Shaker with Platform for 4 Microplates
The small Orbit Digital Shaker features variable speed across a broad range, making it useful for a variety of applications. Both time of operation and shaker speed are set and displayed digitally, with their values shown on the large 3 digit LED. Parameters are selected with an easy turn knob. A sturdy base encloses the motor for quiet, vibration free operation. Model can be used in temperature controlled environments. Their compact size makes them ideal for incubator use.
Research Products International Corp Orbi-Shaker Jr., Compact Orbital Shaker with Flat Mat Platform
Convenient size orbital shaker fits easily on a benchtop or in cold room or incubator. Compact design measures 11" x 10 3/4" x 5"H and weighs only 12 pounds. Ideal for a variety of laboratory applications that requires unattended mixing.
Features include high tech microprocessor monitoring system that ensures maximum accuracy and safety through the entire cycle. Supplied with standard non-slip mat platform (9 1/2" x 8"), instructions and a two year warranty.
Alkali Scientific™ (BT4011) Orbi-Shaker CO2 Extra Large Platform with Remote Controller for CO2 Incubators, 115V
Designed to fit and maximize capacity in most CO2 incubators Remote control, adjust without disrupting the CO2 environment Horizontally circular 19mm orbit for aeration & mixing Instantly exchange flask clamps with MAGic Clamp™ accessories (PATENTED) The newly upgraded Alkali Scientific™ Orbi-Shaker CO2 XL (BT4011) now features an advanced touch screen controller for more powerful programming. The BT4011 Orbi-Shaker CO2 XL is supplied with a 16 x 16.5" non-slip platform.If you will be shaking at speeds below 120 rpm you can use the included rubber topped platform. For speeds in excess of this the convenient MAGic Clamp™ platform is available for use with Erlenmeyer flasks and test tube racks.These magnetic platform and clamps make is easy to swap out one size for another.
Cole-Parmer IKA MTS 2/4 ORBITAL SHAKER DIG
IKA MTS 2/4 Orbital Shaker digital 0 to 1100 rpm microtiter plates
Electron Microscopy Sciences EMS SEM Orbital Specimen Holder Pin Mount
The EMS Orbital Specimen Holder's clever design allows you to effortlessly rotate the specimen completely around an axis. The pot is coated to reduce noise, producing a black background behind the subject so every detail stands out, allowing the capture of stunning, clear images. The pot is detachable and fully repositionable below the pivoted mount. The position and hold of the sample can be controlled with the simple turn of a screw.